I-VITHY®I-Titanium Powder Sintered Cartridgeyenziwe nge-titanium powder ngokusebenzisa i-high-temperature sintering. Ayinakho ukuchithwa kwemidiya futhi akwethusi noma yikuphi ukungcola kwamakhemikhali. Ingamelana nokuvalwa okuphindaphindiwe kwezinga lokushisa eliphezulu noma ukusetshenziswa okuqhubekayo kwethempelesha eliphezulu. Ikhatriji yesihlungi se-titanium rod ingamelana nezinga lokushisa eliphakeme elingu-280°C (esimeni esimanzi) futhi ingamelana noshintsho lwengcindezi noma imithelela. Inamandla amakhulu okukhathala, ukuhambisana kahle kwamakhemikhali, ukumelana nokugqwala, futhi ifanele ukuhlunga ama-asidi, ama-alkali, nezinyibilikisi eziphilayo. Impahla ye-titanium ingamelana nama-asidi aqinile futhi ingahlanzwa futhi isetshenziswe kabusha. Ngokusebenza okuvelele, ingasetshenziselwa kokubili ukuhlunga kokudonsa kanye nokuhlunga kwengcindezi.
I-cartridge iyatholakala nama-end caps afana ne-M20, M30, 222 (uhlobo lokufaka), 226 (uhlobo lwe-clamp), i-flat, i-DN15, ne-DN20 (uchungechunge), kuyilapho ama-end caps akhethekile angenziwa ngokwezifiso.
| Ukugcinwa Izilinganiso | 0.22, 0.45, 1, 3, 5, 10, 15, 20, 30, 50, 80, 100μm |
| EI-nd Cap (Material TA1 Titanium) | I-M20, M30, 222 (uhlobo lokufaka), 226 (uhlobo lwe-clamp), flat, DN15, kanye ne-DN20 (uchungechunge), okunye okwenziwa ngokwezifiso |
| Diameter | Φ14, 20, 30, 35, 40, 50, 60, 70, 75, 80 mm |
| Length | 10 - 1000 mm |
| MI-aximum Temperature Resistance | 280 °C (esimeni esimanzi) |
| Φ30 Uchungechunge | Φ40 Uchungechunge | Φ50 Uchungechunge | Φ60 Uchungechunge |
| Φ30 × 30 | Φ40 × 50 | Φ50 × 100 | Φ60 × 125 |
| Φ30 × 50 | Φ40 × 100 | Φ50 × 200 | Φ60 × 254 |
| Φ30 × 100 | Φ40 × 200 | Φ50 × 250 | Φ60 × 300 |
| Φ30 × 150 | Φ40 × 300 | Φ50 × 300 | Φ60 × 500 |
| Φ30 × 200 | Φ40 × 400 | Φ50 × 500 | Φ60 × 750 |
| Φ30 × 300 | Φ40 × 500 | Φ50 × 700 | Φ60 × 1000 |
I-cartridge ingenziwa kokubili isihlungi esizenzakalelayo nesihlungi semanuwali.
1. Isihlungi esizenzakalelayo:
2. Isihlungi mathupha:
Izindlu zokuhlunga zenziwe ngensimbi engagqwali yekhwalithi ephezulu engu-304 noma engu-316L, futhi kokubili indawo yangaphakathi nengaphandle ipholishwa ngesibuko. Ifakwe i-cartridge eyodwa noma eminingi ye-titanium rod, eyinikeza izici zokumelana nokushisa okuphezulu, ukumelana nokugqwala, ukunemba okuphezulu kokuhlunga (kufika ku-0.22 um), okungeyona ubuthi, akukho ukuchithwa kwezinhlayiyana, ukumuncwa kwezingxenye zemithi, akukho ukungcoliswa kwesixazululo sokuqala, nempilo ende yesevisi (imvamisa eyi-5-10 yonke izidingo zokudla neminyaka eyi-10) I-GMP.
Ngaphezu kwalokho, inezinzuzo zobukhulu obuncane, isisindo esincane, ukusetshenziswa okulula, indawo enkulu yokuhlunga, izinga eliphansi lokuvinjelwa, isivinini sokuhlunga okusheshayo, akukho ukungcola, ukuqina okuhle kokushisa, nokuzinza okuhle kakhulu kwamakhemikhali. Izihlungi ze-Microfiltration ziyakwazi ukususa izinhlayiya eziningi, zizenze zisetshenziselwe kabanzi ukuhlunga okunembayo nokuvala inzalo.
| TI-heoretical Flow Rate | Ci-artridge | Ii-nlet & Outlet Pipe | Cukuhlangana | Ireferensi ye-Dimensional yobukhulu bangaphandle | ||||||
| m3/h | Qty | Length | OUbubanzi besibeletho (mm) | Mindlela | Sukucaciswa | A | B | C | D | E |
| 0.3-0.5 | 1 | 10'' | 25 | Ukufakwa okusheshayo | Φ50.5 | 600 | 400 | 80 | 100 | 220 |
| 0.5-1 | 20'' | 25 | 800 | 650 | ||||||
| 1-1.5 | 30'' | 25 | 1050 | 900 | ||||||
| 1-1.5 | 3 | 10'' | 32 | Ukufakwa okusheshayo | Φ50.5 | 650 | 450 | 120 | 200 | 320 |
| 1.5-3 | 20'' | 32 | 900 | 700 | ||||||
| 2.5-4.5 | 30'' | 34 | 1150 | 950 | ||||||
| 1.5-2.5 | 5 | 10'' | 32 | Ukufakwa okusheshayo | Φ50.5 | 650 | 450 | 120 | 220 | 350 |
| 3-5 | 20'' | 32 | 900 | 700 | ||||||
| 4.5-7.5 | 30'' | 38 | 1150 | 950 | ||||||
| 5-7 | 7 | 10'' | 38 | Ukufakwa okusheshayo kwe-flange enentambo | Φ50.5 G1'' I-DN40 | 950 | 700 | 150 | 250 | 400 |
| 6-10 | 20'' | 48 | 1200 | 950 | ||||||
| 8-14 | 30'' | 48 | 1450 | 1200 | ||||||
| 6-8 | 9 | 20'' | 48 | Ukufakwa okusheshayo kwe-flange enentambo | Φ64 G1.5'' I-DN50 | 1000 | 700 | 150 | 300 | 450 |
| 8-12 | 30'' | 48 | 1250 | 950 | ||||||
| 12-15 | 40'' | 48 | 1500 | 1200 | ||||||
| 6-12 | 12 | 20'' | 48 | Ukufakwa okusheshayo kwe-flange enentambo | Φ64 G1.5'' I-DN50 | 1100 | 800 | 200 | 350 | 500 |
| 12-18 | 30'' | 57 | 1350 | 1050 | ||||||
| 16-24 | 40'' | 57 | 1600 | 1300 | ||||||
| 8-15 | 15 | 20'' | 76 | I-flange enentambo | G2.5'' DN65 | 1100 | 800 | 200 | 400 | 550 |
| 18-25 | 30'' | 76 | 1350 | 1050 | ||||||
| 20-30 | 40'' | 76 | 1300 | 1300 | ||||||
| 12-21 | 21 | 20'' | 89 | I-flange enentambo | G3'' I-DN80 | 1150 | 800 | 200 | 450 | 600 |
| 21-31 | 30'' | 89 | 1400 | 1100 | ||||||
| 27-42 | 40'' | 89 | 1650 | 1300 | ||||||
Isetshenziswa kakhulu ekuhlungeni i-asidi, i-alkali, kanye ne-organic solvent, njll. ezimbonini ezifana nemithi, ukudla, amakhemikhali, i-biotechnology, kanye namakhemikhali e-petrochemicals.
1. Ukumelana Nokugqwala
Insimbi ye-Titanium iyinsimbi engenzi lutho enokumelana nokugqwala okuhle kakhulu. I-titanium rod cartridge eyenziwe ngensimbi ye-titanium ingasetshenziselwa ukuhlunga kuzinto eziqinile ze-alkali kanye ne-asidi eqinile. Isetshenziswa kabanzi embonini yamakhemikhali kanye nenqubo yokuhlunga yokukhiqizwa kwe-organic solvent enzyme embonini yezemithi. I-cartridge ye-Titanium iwusizo ikakhulukazi ezimeni lapho kusetshenziswa khona izinyibilikisi zemvelo njenge-acetone, i-ethanol, i-butanone, njll. Ezimweni ezinjalo, amakhatriji esihlungi se-polymer afana ne-PE kanye ne-PP cartridges athambekele ekuhlakazweni yilezi zinyibilikisi zemvelo. Ngakolunye uhlangothi, izinduku ze-titanium zizinzile kuzincibilikisi zemvelo futhi ngaleyo ndlela zithola ukusetshenziswa kakhulu.
Ibanga lokumelana nokubola kwesihlungi se-titanium lingahlukaniswa ngale ndlela elandelayo:
Isigaba A: Imelana nokugqwala ngokugcwele ngezinga lokugqwala elingaphansi kuka-0.127mm/ngonyaka. Ingasetshenziswa.
Isigaba B: Imelana nokugqwala ngokulinganiselwe ngezinga lokugqwala phakathi kuka-0.127-1.27mm/ngonyaka. Ingasetshenziswa.
Isigaba C: Alikwazi ukumelana nokugqwala ngezinga lokugqwala elingaphezu kuka-1.27mm/ngonyaka. Ayikwazi ukusetshenziswa.
| Isigaba | MIgama lendawo | MI-aterial Concentration (%) | Tizinga lokushisa (℃) | Izinga lokugqwala (mm/ngonyaka) | I-Corrosion Resistance Grade |
| Ama-acids e-inorganic | I-Hydrochloric acid | 5 | Ukushisa kwegumbi/ukubilisa | 0.000/6.530 | I-A/C |
| 10 | Ukushisa kwegumbi/ukubilisa | 0.175/40.870 | B/C | ||
| I-sulfuric acid | 5 | Ukushisa kwegumbi/ukubilisa | 0.000/13.01 | I-A/C | |
| 60 | Izinga lokushisa legumbi | 0.277 | B | ||
| I-nitric acid | 37 | Ukushisa kwegumbi/ukubilisa | 0.000/<0.127 | I-A/A | |
| 90 (emhlophe futhi ethukuthele) | Izinga lokushisa legumbi | 0.0025 | A | ||
| I-Phosphoric acid | 10 | Ukushisa kwegumbi/ukubilisa | 0.000/6.400 | I-A/C | |
| 50 | Izinga lokushisa legumbi | 0.097 | A | ||
| I-asidi ehlanganisiwe | HCL 27.8% HNO317% | 30 | / | A | |
| HCL 27.8% HNO317% | 70 | / | B | ||
| HNO3: H2SO4=7:3 | Izinga lokushisa legumbi | <0.127 | A | ||
| HNO3: H2SO4=4:6 | Izinga lokushisa legumbi | <0.127 | A |
| Isigaba | MIgama lendawo | MI-aterial Concentration (%) | Tizinga lokushisa (℃) | Izinga lokugqwala (mm/ngonyaka) | I-Corrosion Resistance Grade |
| Isixazululo saline | I-ferric chloride | 40 | Izinga lokushisa lekamelo/95 | 0.000/0.002 | I-A/A |
| I-sodium chloride | Isixazululo esigcwele ngo-20 °C | Ukushisa kwegumbi/ukubilisa | <0.127/<0.127 | I-A/A | |
| I-ammonium chloride | 10 | Ukushisa kwegumbi/ukubilisa | <0.127/<0.127 | I-A/A | |
| I-Magnesium chloride | 10 | Ukushisa kwegumbi/ukubilisa | <0.127/<0.127 | I-A/A | |
| I-Copper sulfate | 20 | Ukushisa kwegumbi/ukubilisa | <0.127/<0.127 | I-A/A | |
| I-Barium chloride | 20 | Ukushisa kwegumbi/ukubilisa | <0.127/<0.127 | I-A/A | |
| I-Copper sulfate | I-CuSO4igcwele, H2SO42% | 30 | <0.127 | I-A/A | |
| I-sodium sulfate | 20 | Ukubilisa | <0.127 | A | |
| I-sodium sulfate | Na2SO421.5% H2SO410.1% ZnSO40.80% | Ukubilisa | / | C | |
| I-ammonium sulfate | Igcwale ngo-20 °C | Ukushisa kwegumbi/ukubilisa | <0.127/<0.127 | I-A/A |
| Isigaba | MIgama lendawo | MI-aterial Concentration (%) | Tizinga lokushisa (℃) | Izinga lokugqwala (mm/ngonyaka) | I-Corrosion Resistance Grade |
| Isixazululo se-alkaline | I-sodium hydroxide | 20 | Ukushisa kwegumbi/ ukubila | <0.127/<0.127 | I-A/A |
| 50 | 120 | <0.127/<0.127 | A | ||
| 77 | 170 | >1.27 | C | ||
| I-potassium hydroxide | 10 | Ukubilisa | <0.0127 | A | |
| 25 | Ukubilisa | 0.305 | B | ||
| 50 | 30/Ukubilisa | 0.000/2.743 | I-A/C | ||
| I-ammonium hydroxide | 28 | Izinga lokushisa legumbi | 0.0025 | A | |
| I-sodium carbonate | 20 | Ukushisa kwegumbi/ ukubila | <0.127/<0.127 | I-A/A |
| Isigaba | MIgama lendawo | MI-aterial Concentration (%) | Tizinga lokushisa (℃) | Izinga lokugqwala (mm/ngonyaka) | I-Corrosion Resistance Grade |
| Ama-asidi e-organic | I-acetic acid | 35-100 | Ukushisa kwegumbi/ ukubila | 0.000/0.000 | I-A/A |
| I-Formic acid | 50 | Ukushisa kwegumbi/ukubilisa | 0.000 | I-A/C | |
| I-Oxalic acid | 5 | Ukushisa kwegumbi/ukubilisa | <0.127/29.390 | I-A/C | |
| I-lactic acid | 10 | Ukushisa kwegumbi/ukubilisa | 0.000/0.033 | I-A/A | |
| I-Formic acid | 10 | Ukushisa kwegumbi/ukubilisa | 1.27 | A/B | |
| 25 | 100 | 2.44 | C | ||
| I-Stearic acid | 100 | Ukushisa kwegumbi/ukubilisa | <0.127/<0.127 | I-A/A |
2. High Temperature Resistance
Isihlungi se-Titanium singakwazi ukumelana namazinga okushisa afika ku-300°C, angenakuqhathaniswa namanye amakhatriji okuhlunga. Lesi sici sisetshenziswa kakhulu ezindaweni zokusebenza ezisezingeni eliphezulu. Kodwa-ke, ama-cartridges okuhlunga enziwe ngezinto ze-polymer ephezulu anokumelana okuphansi kwezinga lokushisa, ngokuvamile awadluli ku-50°C. Uma izinga lokushisa lidlula u-50°C, ukusekela kwazo nolwelwesi lwesihlungi kuzoshintsha, okuzoholela ekuphambukeni okuphawulekayo ekunembeni kokuhlunga. Ngisho namakhatriji okuhlunga e-PTFE, lapho esetshenziswa ezindaweni zokusebenza ezinengcindezi yangaphandle engu-0.2 MPa namazinga okushisa angaphezu kuka-120°C, azokhubaza futhi aguge ngokuhamba kwesikhathi. Ngakolunye uhlangothi, i-titanium rod filter cartridges ingasetshenziswa isikhathi eside ezindaweni ezinjalo, ngaphandle koshintsho kuma-micro-pores noma ukubukeka kwayo.
Isetshenziswa kakhulu ekuhlungeni uketshezi olunezinga lokushisa eliphezulu nokuhlunga kwesitimu (njengokuhlunga ngesitimu ngesikhathi sezinqubo zokuvutshelwa).
3. Ukusebenza Okumangalisayo Komshini (Amandla aphezulu)
Izihlungi ze-Titanium rod cartridges zisebenza kahle kakhulu, zimelana nengcindezi yangaphandle engu-10 kg kanye namandla angaphakathi okucekela phansi angama-6 kg (ahlolwe ngaphandle kwamalunga). Ngakho-ke, izihlungi zenduku ye-titanium zingasetshenziswa ezinqubweni ezibandakanya ukucindezela okuphezulu nokuhlunga okusheshayo. Amanye amakhatriji esihlungi se-polymer aphezulu enza izinguquko ekuvuleni kwe-microporous noma ngisho nokuphuka lapho engaphansi kwengcindezi yangaphandle engaphezu kuka-0.5 MPa.
Izicelo: Imboni yokukhiqiza i-Chemical fibre, imboni yezemithi, ukuhlunga komoya okucindezelwe, ukungena komoya okujulile ngaphansi kwamanzi, ukungenisa umoya nokukhipha amagwebu kwama-coagulant, njll.
Ukusebenza okuhle kakhulu komshini (njengoba kukhonjisiwe esithombeni), kuqinile futhi kulula (amandla adonsela phansi athile angu-4.51 g/cm3).
| Mi-odel | Ukusebenza Komshini Emazingeni Okushisa Egumbi | |
| σb (kg/mm2) | δ10 (%) | |
| T1 | 30-50 | 23 |
| T2 | 45-60 | 20 |
4. Excellent Regeneration Effect
I-cartridge ye-titanium rod filter inemiphumela emihle yokuvuselela. Ngenxa yokumelana nokugqwala okuhle, ukumelana nokushisa okuphezulu, nokusebenza kwamandla aphezulu, kunezindlela ezimbili zokuvuselela: ukuvuselelwa ngokomzimba nokuvuselelwa kwamakhemikhali.
Izindlela zokuvuselela ngokomzimba:
(1) Ukubuyisela amanzi ahlanzekile (2) Ukufutha ngesitimu (3) Ukuhlanza nge-ultrasonic
Izindlela zokuvuselela amakhemikhali:
(1) Ukugeza nge-alkaline (2) Ukugeza nge-asidi
Phakathi kwalezi zindlela, ukuvuselelwa kwamakhemikhali nezindlela zokuhlanza i-ultrasonic zingcono kakhulu, ngokuncipha okuphansi kokusebenza kahle kokuhlunga. Uma isetshenziswe noma ihlanzwa ngokuvumelana nokusebenza okuvamile, impilo yesevisi inganwetshwa kakhulu. Ngenxa yomphumela omuhle wokwelapha wokuvuselelwa kabusha kwezinduku ze-titanium, ziye zasetshenziswa kakhulu ekuhlungeni uketshezi lwe-viscous.
| Mi-odelIndex | T1 | T2 | T3 | T4 | T5 | T6 | T7 | T8 | T9 |
| FIsilinganiso sokulinganisa (μm) | 50 | 30 | 20 | 10 | 5 | 3 | 2 | 1 | 0.45 |
| I-Relative Permeability Coefficient (L/cm2.min.Pa) | 1 × 10-3 | 5 × 10-4 | 1 × 10-4 | 5 × 10-5 | 1 × 10-5 | 5 × 10-6 | 1 × 10-6 | 5 × 10-7 | 1 × 10-7 |
| I-Porosity (%) | 35-45 | 35-45 | 30-45 | 35-45 | 35-45 | 35-45 | 35-45 | 35-45 | 35-45 |
| I-Internal Rapture Pressure (MPa) | ≥0.6 | ≥0.6 | ≥1 | ≥1 | ≥1 | ≥1 | ≥1 | ≥1 | ≥1 |
| Ingcindezi Yokuphuka Kwangaphandle (MPa) | ≥3.5 | ||||||||
| I-rated Operating Pressure (MPa) | 0.2 | ||||||||
| FIzinga eliphansi (m3/h, 0.2MPa amanzi ahlanzekile) | 1.5 | 1.0 | 0.8 | 0.5 | 0.35 | 0.3 | 0.28 | 0.25 | 0.2 |
| FIzinga eliphansi (m3/min, 0.2MPa umoya) | 6 | 6 | 5 | 4 | 3.5 | 3 | 2.5 | 2 | 1.8 |
| Application Izibonelo | Ukuhlunga kwezinhlayiyana ezimahhadla | Ukuhlunga kwenhlabathi eqinile | Ukuhlunga kahle kwe-sediment | Ukuhlunga inzalo | |||||
